PTE – Pressure transducer

Supply voltage 24 Vdc
Wiring protection against polarity reversal on power supply and against short circuit on output signal
Current consumption ≤ 30mA if current output – ≤ 8mA if voltage output
Degree of protection IP67 with M12 connector – IP65 with Mini DIN43650 connector
Relative setting range -1…4bar; 0…2bar; -1…9bar; 0…5bar; 0…10bar; 0…20bar; 0…50bar; 0…100bar; 0…200bar; 0…400bar
Tightening torque ≤ 20Nm
Accuracy ≤ 1% F.S. / year /@25°C
Stability ≤ 0.3% F.S. / year /@25°C
Linearity, hysteresis, repeatability ≤ 0.4% F.S.
Response time ≤ 5 ms
Maximum temperature (in contact with fluid) -25°C … +125°C
Storage temperature -40°C … +135°C
Output type Voltage 0-10V 3 poles minimum load 3KΩ – Current 4/20mA 2 poles I ≤ 30 mA
Body material Stainless steel AISI 316
Diaphragm/Piston gasket material NBR (standard)
Thread G1/4BSPP – other threads available on request
Mechanical life 3×106 cycles
Dimensions Body Ch. 24 Max height 89mm
Certifications CE